Product ID:WHITE TRAFFIC AND ZONE MARKING PAINT, 11-4
MSDS Date:10/20/1986
FSC:8010
NIIN:00N037172
MSDS Number: BQQCG

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TERM & RPTD CONT. AN INGRED(S) CONTAINED

RTECS: 9999999ZZ

FORMING TISSUES. PRLNGD EXPOS TO AN INGRED(S) IN

RTECS: 9999999ZZ

INGRED(S) CONTAINED IN THIS PROD MAY CAUSE NERVOUS

RTECS: 9999999ZZ

METALLIC TASTE IN MOUTH, LOSS OF APPETITE,

RTECS: 9999999ZZ

DISTURBANCE OF REST & SLEEP, & WEAKNESS. EYE

RTECS: 9999999ZZ

INDICATIONS THAT SOLV LEV ARE TOO HIGH. REDNESS,

RTECS: 9999999ZZ

BE INDICATIONS THAT EXCESS EYE CONT HAS OCCURED.

RTECS: 9999999ZZ

ARE CONDITIONS ASSOC W/EXCESS SKIN CONT.

RTECS: 9999999ZZ

TO A CORROSIVE MATL. PERSISTENT SKIN/EYE

RTECS: 9999999ZZ

CAREFULLY TO DETERMINE TYPE OF AIRBORNE CONTAM

RTECS: 9999999ZZ

SUGGESTED EXPOS LIMS, LEL STATED LIM, & TO REMOVE

RTECS: 9999999ZZ

1); (LEAD CHROMATE YELLOW

CAS: 7758-97-6

RTECS: GB2975000

Fraction By Weight: 10%

OSHA PEL 0.1 MG/(CRO3)/M3,C

ACGIH TLV: 0.012MG(CR)/M3

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 10%

TALC (CONTAINING NO ASBESTOS); (MAGNESIUM SILICATE)

CAS: 14807-96-6

RTECS: MW2710000

Fraction By Weight: 1%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 2 MG/M3 RDUST

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 30-35%

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 15 - 24%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

NAPHTHA, LIGHT ALIPHATIC (PETROLEUM) (THIS MATERIAL

CAS: 64742-89-8

Fraction By Weight: 20%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 1 - 10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NAPHTHA, LIGHT ALIPHATIC (PETROLEUM) (THIS MATERIAL

CAS: 64742-89-8

Fraction By Weight: 15%

FILM FORMERS, RESINS AND ADDITIVES (PROPRIETARY)

Fraction By Weight: 20%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOTE:TOLUENE(CAS # 108-88-2)APPEARS ON
THE NAVY LISTING OF OCCUP CHEM REPRO HAZ.SEEK CONSULTATION FROM
APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE
HNDLG & EXPOS REC .ACUTE:I NGEST:HARMFUL/FATAL IF INGEST.DRIED FILM
OF PAINT MAY BE HARMFUL IF EATEN/CHEWED.EYE:CAUSES IRRIT.(EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SKIN:MAY CAUSE MOD IRRIT. PRLNGD/RPTD
CONT MAY CAUSE AN ALLERGIC RXN. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL. RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERVOUS SYS DMG. INTENTIONAL MISUSE BY DELIBERATELY
CONC & INHAL CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:AVOID LONG (ING
10)

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LEAST 15 MIN. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY A RTIF RESP & OTHER SUPPORTIVE MEASURES AS REQ. OTHER:IF ANY
OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CTR
CTR, EMERG ROOM/MD IMMED; HAVE MSDS AVAIL. INGEST:EXCESS EXPOS (ING
18)

Flash Point Method:PMCC
Flash Point:64F,17.8C
Lower Limits:0.9%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CONTRS TO PREV PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELECT EQUIP, SPARKS & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIP
W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE
ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE I NTO CONTR FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LRG AMTS IN
BLDG DESIGNED & PROT FOR STORAGE OF NFPA CLASS IB FLAMM LIQ. CONTRS
SHOULD BE GROUNDED WHEN POURING.
Other Precautions:AVOID FREE FALL OF LIQ IN EXCESS OF A FEW INCHES.

Respiratory Protection:OVEREXPOS TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C) PAINT SPRAY/AIR SULLPLED (TC-19C) RESP MAY ALSO REDUCE
EXPOS. IN ALL CASES, READ R ESP MFR'S INSTRUCTIONS & LIT (ING 19)
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHAUST VENT IN VOLUME &
PATTERN TO KEEP CONC OF INGRED LISTED BELOW LOWEST (ING 20)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERMEABLE APRON AND GLOVES CONSTRUCTED
OF:NITRILE RUBBER, NEOPRENE RUBBER OR POLYVINYL ALCOHOL.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:CLASS IB FLAMM LIQ FIRES. FIRE FIGHT PROC:POSS
AUTOIGNITION/EXPLOS WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED,
FOG NOZZ ARE PREF. EXPLOS HAZ:HOT SURF. TOX GASES MAY FORM WHEN
PROD IS CONTACTED BY FLAME/HOT SURF. HAZ DECOMPPROD:INCL:CARBON
MONOXIDE, LEAD OXIDE.

HCC:F3
Boiling Pt:B.P. Text:>230F,>110C
Vapor Pres:5.1
Vapor Density:HVR/AIR
Evaporation Rate & Reference:108 (BU AC = 100)
Solubility in Water:0.0%
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:84.40

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/PROD MAY
PRODUCE FUMES(SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH LOCAL, STATE AND FEDERAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.